Přejít k obsahu

Západočeská univerzita

fortech-logo-blue

Česky English

Důležité odkazy

ZČU Publications

Publications

2017

  1. New Heat Treatment Process for Advanced High-Strenght Steels, Bublíková, D.; Jeníček, Š.;  Vorel, I.; Mašek, B., IOP Conference Series: Earth and Environmental Science, 2017, roč. 179, č. 1, s. 1-8. ISSN: 1755-1307
  2. Semi-solid processing of high-chromium tool steel to obtain microstructures without carbide network, Jirková, H.; Aišman, D.; Rubešová, K.; Opatová, K.; Mašek, B., IOP Conference Series: Earth and Environmental Science, 2017, roč. 179, č. 1, s. 1-6. ISSN: 1755-1307

2016

  1. Semi-solid processing and its as yet unexplored potential, Aišman, D.; Rubešová, K.; Mašek, B., Semi-solid processing and its as yet unexplored potential. In Tagungsband zum 18. Werkstofftechnischen Kolloquium in Chemnitz. Chemnitz: 2016. s. 339-346. ISBN: 978-3-00-052212-3 , ISSN: 1439-1597
  2. Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding, Mašek, B.; Jirková, H.; Kučerová, L., Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding. In Tagungsband zum 18. Werkstofftechnischen Kolloquium in Chemnitz. Chemnitz: 2016. s. 494-500. ISBN: 978-3-00-052212-3 , ISSN: 1439-1597
  3. Influence of Nb Micro-alloying on TRIP Steels Treated by Continuous Cooling Process, Kučerová, L.; Jirková, H.; Mašek, B., Influence of Nb Micro-alloying on TRIP Steels Treated by Continuous Cooling Process. In 2016.
  4. Steel - a Classic Material with a Large Potential for the Future, Mašek, B.; Jirková, H.; Aišman, D.; Jeníček, Š., Steel - a Classic Material with a Large Potential for the Future. In Tagungsband zum 18. Werkstofftechnischen Kolloquium in Chemnitz. Chemnitz: 2016. s. 45-52. ISBN: 978-3-00-052212-3 , ISSN: 1439-1597
  5. Capabilities of Unconventional Processing of Multiphase AHSS Steels, Jirková, H.; Mašek, B.; Štádler, C.; Jeníček, Š., Capabilities of Unconventional Processing of Multiphase AHSS Steels. In Tagungsband zum 18. Werkstofftechnischen Kolloquium in Chemnitz. Chemnitz: TU Chemnitz, Fakultät für maschinenbau, 2016. s. 362-371. ISBN: 978-3-00-052212-3 , ISSN: 1439-1597
  6. Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding, Mašek, B.; Jirková, H.; Kučerová, L., Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding. In 2016.
  7. Heat treatment of closed-die forgings-process optimisation using modelling and FEM simulations, Mašek, B.; Vorel, I.; Štádler, C.; Urbánek, M.; Fedorko, M.; Vančura, F., Heat treatment of closed-die forgings-process optimisation using modelling and FEM simulations. In XXXV. Verformungskundliches Kolloquium. Leoben: Lehrstuhl für Umformtechnik, Leoben, 2016. s. 11-14. ISBN: 978-3-902078-21-6
  8. New concept for manufacturing closed die forgings of high strength steels, Ibrahim, K.; Vorel, I.; Bublíková, D.; Mašek, B., Materiali in Technologije, 2016, roč. 50, č. 4, s. 623-626. ISSN: 1580-2949
  9. Způsob výroby ledeburitických vysokolegovaných ocelí tepelným zpracováním, Aišman, D.; Mašek, B.; Jirková, H., Praha 2016
  10. Způsob tváření hybridních součástí zatepla, Mašek, B.; Jirková, H.; Vančura, F.; Štádler, C., Praha 2016
  11. Material and technological modelling of closed-die forging, Vorel, I.; Jeníček, Š.; Jirková, H.; Mašek, B., Materiali in Tehnologije, 2016, roč. 50, č. 4, s. 499-503. ISSN: 1580-2949
  12. Simulator of Thermomechanical Treatment of Metals, Káňa, J.; Vorel, I.; Ronešová, A.; In DAAAM 2015. Vienna: DAAAM International Vienna, 2016. s. 0513-0518. ISBN: 978-3-902734-07-5 , ISSN: 1726-9679
  13. Steel - a Classic Material with a Large Potential for the Future, Mašek, B.; Jirková, H.; Aišman, D.; Jeníček, Š., In IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing LTD, 2016. s. 45-52. ISBN: 978-3-00-052212-3 , ISSN: 1757-8981
  14. Semi-solid processing and its as yet unexplored potential, Aišman, D.; Rubešová, K.; Mašek, B., In IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing Ltd, 2016. s. 339-346. ISBN: 978-3-00-052212-3 , ISSN: 1757-8981
  15. Heat treatment of closed-die forgings-process optimisation using modelling and FEM simulations, Mašek, B.; Vorel, I.; Štádler, C.; Urbánek, M.; Fedorko, M.; Vančura, F., In XXXV. Verformungskundliches Kolloquium. Leoben: Lehrstuhl für Umformtechnik, Leoben, 2016. s. 11-14. ISBN: 978-3-902078-21-6
  16. Ultra high strenght composite steels, Vorel, I., In SVOČ 2016. Plzeň: Západočeská univerzita v Plzni, 2016. s. 1-7. ISBN: 978-80-261-0619-7
  17. Alternative Heat treatment OF MnSi steels BY intercritical annealing and QUENCHING AND PARTITIONING PROCESS, Bublíková, D.; Vorel, I.; Jirková, H.; Mašek, B., In 25th international conference on metallurgy and materials METAL 2016. Ostrava: TANGER Ltd., 2016. s. 664-669. ISBN: 978-80-87294-67-3
  18. Cyclic Response of Footing with Embedment Depth on Multi-Layered Geocell-Reinforced Bed, Khalaj, O.; Davarifard, S.; Tafreshi, S.N.M.; Mašek, B., In IOP Conference Series: Earth and Environmental Science. Praha: IOP Publishing Ltd., 2016. s. 1-9. ISBN: neuvedeno , ISSN: 1755-1307
  19. AN IMPROVEMENT OF CLOSED DIE FORGING OF HIGH STRENGTH STEEL PRODUCTS AND A STUDY OF ITS WELDING SUITABILITY, Ibrahim, K., In SVOČ 2016. Plzeň: ZCU Plzeň, 2016. s. 1-6. ISBN: 978-80-261-0619-7
  20. Behaviour of new ODS alloys under single and multiple deformation, Mašek, B.; Khalaj, O.; Nový, Z.; Kubina, T.; Jirková, H.; Svoboda, J.; Štádler, C., Materiali in Tehnologije, 2016, roč. 50, č. 6, s. 891-898. ISSN: 1580-2949

2015

  1. Production of Shaped Semi-products from AHS Steels by Internal Pressure. Vorel, I., Jirková, H., Mašek, B., Kurka, P. In: MATERIALI IN TECHNOLOGIJE, roč. 5, č. 49, s. 739-744. ISSN 1580-2949
  2. Unvoncentional Microstructures in Tool Steel Obtained by Semi-Solid Processing and Subsequement Heat Treatment. Aišman, D., Mašek, B., Jeníček, Š. In:S2P 2014. Pfaffikon, Schwitzerland: Trans Tech Publications Ltd., 2015. s. 235-240. ISBN: 978-3-03835-220-4 , ISSN: 1012-0394
  3. Steels with High Temperature Carbides - New Possibilities for Semi-solid State Processingin. Jirková, H., Rubešová, K., Pileček, V., Behúlová, M. In: S2P 2014. Pfaffikon, Schwitzerland: Trans Tech Publications Ltd., 2015. s. 325-331. ISBN: 978-3-03835-220-4 , ISSN: 1012-0394
  4. Measuring Material Properties of Metal Foils Using Bulge Test Method. Káňa, J., Rubešová, K., Mašek, B. In: 25th DAAAM International Symposium on Intelligent Manufacturing and Automation (DAAAM 2014), 26.-29. 11. 2014, Vienna, Austria. Procedia Engineering 100 (2014), ISSN 1877-7058, pp. 861-867, DOI: 10.1016/j.proeng.2015.01.442
  5. Material-technological Modelling of C45 Steel die Forgings. Vorel, I., Vančura, F., Pileček, V., Jirková, H., Mašek, B. In: 25th DAAAM International Symposium on Intelligent Manufacturing and Automation (DAAAM 2014), 26.-29. 11. 2014, Vienna, Austria. Procedia Engineering 100 (2014), ISSN 1877-7058, pp. 714-721, DOI: 10.1016/j.proeng.2015.01.424
  6. Effect of Input Structure of Blank on Development of Final Structure when Processing at Temperatures between Solidus and Liquidus. Mašek, B., Vančura, F., Aišman, D., Jirková, H., Wagner, F.-X. In: 25th DAAAM International Symposium on Intelligent Manufacturing and Automation (DAAAM 2014), 26.-29. 11. 2014, Vienna, Austria. Procedia Engineering 100 (2014), ISSN 1877-7058, pp.722-729, DOI: 10.10.16/j.proeng.2015.01.425
  7. Innovative Konzepte für Innehochdruckumformen. Mašek, B., Jirková, H., Vorel, I., Kůrka, P., Mahn, U. In: XXXIV. Verformungskundliches Kolloquium, Leoben, 14.-17. 3. 2015, Buchmayer, B. (eds), Lehrstuhl für Umformtechnik, s. 164-168. ISBN 978-3-902078-20-9
  8. Investigation on new Creep and Oxidation Resistant Materials. Khalaj, O., Mašek, B., Jirková, H.,Ronešová A., Svoboda J. In: MATERIALI IN TECHNOLOGIJE, roč. 4, č. 49, pp. 645-651, ISSN 1580-2949
  9. The Effect of Chromium on Microstructure Development during Q-P Process . Jirková H., Kučerová L., Mašek B. In: Materials Today: Proceedings, 2S3F. Elsevier Ltd., Amsterodam, Netherlands, 2015. pp. 627-630, ISSN 2214-7853, DOI: 10.1016/j.matpr.2015.07.362
  10. Continuous Cooling of CMnSi TRIP steel. Kučerová L., Jirková H., Mašek B. In: Materials Today: Proceedings,2S3F. Elsevier Ltd., Amsterodam, Netherlands, 2015. pp. 677-680, ISSN 2214-7853, DOI: 10.1016/j.matpr.2015.07.374
  11. Various approaches to accelerated carbide spheroidization of 54SiCr Steel. Kučerová L., Jirková H., Mašek B. In: Key Engineering Materials, č. 647, Schwitzerland, 2015. pp. 3-8, DOI: 10.4028/scientific.net/KEM.647.3
  12. Material-technological modelling of heat treatment of forgings in continous furnace. Vorel I., Vančura F., Fedorko M., Mašek B. In: Kovárenství, č. 53, April 2015, Czech Republic. pp. 44-47
  13. Material Technological Modeling of Thermomechanical Processing of Die Forging of Microalloyed Steel. Vančura F., Vorel I., Pileček V., Mašek B. In: Kovárenství, č. 53, April 2015, Czech Republic, pp. 52-55
  14. 25 years - advance retrospective. Mašek B., Jirková H. In: Kovárenství, č. 53, April 2015, Czech Republic, pp. 73-76
  15. Very Strong Steel for Lightweight Automotive Parts. Vorel I., Jirková H., Kurka P. In: SVOČ 2015, Západočeská univerzita v Plzni, Czech Republic, pp. 1-9, ISBN: 978-80- 261-0509- 1
  16. Mechanical Properties of Laser Welds in Martensitic-austenitic AHS Steel. Mašek B., Rubešová K., Khalaj O., Jirková H. In: Zváranie / Svařování, Slovak Republic, 2015, pp. 16-18
  17. Mechanical Properties of Laser Welds In Martensitic-Austenitic AHS Steel. Mašek B., Rubešová K., Khalaj O., Jirková H. In: 7th International Scientific Conference Management of Technology - Step to Sustainable Production, Croatian Association for PLM, 10.-12. 6. 2015, Zagreb, Croatia, , pp. 1-4, ISSN 1849-7586
  18. Stabilization of Retained Austenite in High-Strength Martensitic Steels with Reduced Ms Temperature. Ibrahim K., Bublíková D., Jirková H., Mašek B. In: METAL 2015 24th International Conference on Metallurgy and Materials, TANGER spol. s r. o., 3.-5. 6. 2015, Ostrava, Czech Republic, pp. 499-504, ISBN 978-80- 87294-62- 8
  19. Comparative Study of Algorithms Used for Automated Evaluation of the Tensile Tests Results. Káňa J., Jeníček Š., Mašek B. In: METAL 2015 24th International Conference on Metallurgy and Materials, TANGER Ltd., 3.-5. 6. 2015, Ostrava, Czech Republic, pp. 688-692, ISBN 978-80- 87294-62- 8
  20. Development of Numerical Models for the Heat-Treatment- process Optimisation in a Closed-Die Forging Production. Maleček L., Fedorko M., Vančura F., Jirková H., Mašek B. IN: MATERIALI IN TECHNOLOGIJE, roč. 3, č. 49, pp. 471-475, ISSN: 1580-2949
  21. Hot Forming of New Submicron-Structured Alloys with Fe-Al Matrix and Al2O3 Particles. Mašek B., Khalaj O., Jirková H., Svoboda J. In: ISMANAM 2015, roč. 7, France
  22. Complex shape metallic glass composites produced in one step by mini-thixofoming. Yilmaz A. H., Aišman David., Jirková H., Behúlová M., Mašek B. In: International Journal of Material Forming, č. 8, pp. 1-8, ISSN: 10.1007/s12289-015- 1266-3
  23. Improvement of pavement foundation response with multi-layers of geocell reinforcement: Cyclic plate load test. Khalaj O., Moghaddas Tafreshi S. N., Mašek B., Dawson A. R. In: Geomechanics and Engineering, roč. 3, č. 9, pp. 373-395, ISSN: 2092-6219, DOI:10.12989/gae.2015.9.3.373
  24. Analysis of Laser Welds on Steel Processed by Q-P Process. Vorel I., Rubešová K., Khalaj O., Opatová K., Wagner M. F. X. In: 4th International Conference on Advances in Mechanical, Aeronautical and Production Techniques - MAPT, Institute of Research Engineers and Doctors (theIRED), New York, pp. 29-32,
    ISBN 978-1-63248-072- 9
  25. Simulator of Thermomechanical Treatment of Metals. Káňa J., Vorel Ivan., Ronešová A. In: 26th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM International Vienna, 21.-24. 10. 2015, Vienna, Austria, pp. 1-7, ISSN 2304-1382, ISBN 978-3-902734-06- 8
  26. Effect of Amount of Deformation on Microstructure Evolution During Controlled Cooling of Forgings from Finish-Forging Temperature. Čubrová J., Vorel I., Vančura F., Mašek B. In: 26th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM International Vienna, 21.-24. 10. 2015, Vienna, Austria, pp. 1-5, ISSN 2304-1382, ISBN 978-3- 902734-06- 8
  27. Material-Technological Modelling of Controlled Cooling of Closed die Forgings from Finish Forging Temperature. Vorel I., Vančura F., Mašek B. In: 24th International Conference on Metallurgy and Materials, TANGER Ltd., 3.-5. 6. 2015, Ostrava, Czech Republic, pp. 202-208, ISBN 978-80- 87294-62-8
  28. Study of Effects of Forging Temperature and Deformation on Microstructure of Closed-Die- Fogred Steel Part Using Material Technological Modeling. Vančura F., Vorel I., Mašek B. In: 23rd International Conference on Materials and Technology, Institute of Metals and Technology, 27.-30. 9.2015, Ljubljana, Slovenija, pp. 247, ISBN 978-961- 92518-8- 1
  29. Effect of Mini-Thixoforming Parameters on Microstructural Evolution in Low-Alloy Steel. Rubešová K., Jirková H., Mašek B., Vorel I. In: 26th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM International Vienna, 21.-24. 10. 2015, Vienna Austria, Vienna, Austria, pp. 1-8, ISSN 2304-1382, ISBN 978-3- 902734-06- 8
  30. Electron Beam Welding of 42SiCr High-strength steel. Vorel Ivan., Čubrová J., Jeníček Š., Mašek B. In: 23rd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY, Institute of Metals and Technology, 28.-30. 9. 2015, Ljubljana, Slovenija, pp. 251, ISBN 978-961- 92518-8- 1
  31. New Manufacturing Processes for Products from Ultra High Strength Steels. Mašek B., Jirková H., Vorel I., Aišman D., Wagner M. F.-X. In: 5th International Conference on Accuracy in Forming Technology, Fraunhofer Institute for Machine Tools and Forming Technology IWU, 10.-11. 11. 2015, Fraunhofer IWU, Germany,
    pp. 493-503, ISBN 978-3- 95735-029- 9
  32. Repairs by welding - little differently. Mašek B. In: Zváranie/Svařování, č. 7-8, 2015, Slovak Republic, pp. 159-160, ISSN 0044-5525
  33. New concept for production of closed die forgings of ultra high strength steels. Mašek B., Jirková H., Vorel I. In: International Conference on "New Developments in Forging Technology", INVENTUM GmbH, 5.- 6. 5. 2015, Felbach, Germany, pp. 169-178, ISBN 978-3- 88355-409- 9
  34. Q-P Process in Manufacture of Hollow Products. Mašek B., Opatová K., Vorel I. In: The 2015 International Conference on Advanced Materials and Engineering Structural Technology In Qindgdao (ICAMEST 2015), CRC Press, 25.-26. 5.2015, London, Great Britain, pp. 467-471, ISBN 978-1- 138-02786-2
  35. Repeated load response of soil reinforced by two layers of geocell. Moghaddas Tafreshi S. N., Khalaj O., Dawson A. R., Mašek B. In: Procedia Earth and Planetary Science, č. 15, pp. 99-104, ISSN 1878-5220
  36. Production of High Strength Hollow Shafts using Tool Hardening and Q-P Process. Mašek B., Vorel I., Opatová K., Kurka Petr., Hahn F., Mahn U. In: 4th International Conference on New Forming Technology, EDP Sciences, 6. -9.8.2015, France, pp. 1-6, ISSN 2261-236X, ISBN 978-2-7598-1823- 5,
    DOI: 10.1051/matecconf/20152106009
  37. Capabilities of Thixoforming of Steels. Nový Z., Opatová K., Štádler C. In: Advanced Materials Research, Vol. 1127, pp. 99-105, ISSN 1662-8985,
    DOI: 10.4028/www.scientific.net/AMR.1127,99
  38. Combination of International high pressure forming and Q-P process for production of hollow products from AHS. Mašek B., Vorel I., Jirková H., Kurka P. In: Advanced Materials Research, Vol. 1127, pp. 9-15, ISSN 1662-8985, DOI: 10.4028/www.scientific.net/AMR.1127.9
  39. Forming and Microstrukture Development of AHS Steels by Temperature under Ac3. Jirková H., Opatová K., Jeníček Š., Mašek B. In: Advanced Materials Research, Vol. 1127, pp. 39-47, ISSN 1662-8985, DOI:10.4028/www.scientific.net/AMR.1127.39
  40. Stabilization of Retained Austenite in High-Strength Martensitic Steels with Reduced Ms Temperature. Ibrahim K., Bublíková D., Jirková H., Mašek B. In: 24th International Confernece on Metallurgy and Materials, TANGER spol. s r. o., 3.-5.6.2015, Ostrava, Czech Republic, pp. 1-6, ISBN 978-80- 87294-58- 1
  41. Comparative Study of Algorithms Used for Automated Evaluation of the Tensile Tests Results. Káňa J., Jeníček Š., Mašek B. In: 24th International Confernece on Metallurgy and Materials, TANGER spol. s r.o., 3.-5.6.2015, Ostrava, Czech Republic, pp. 1-5, ISBN 978-80- 87294-58- 1
  42. Material-Technological Modelling of Controlled Cooling of Closed die Forgings from Finish Forging Temperature. Vorel I., Vančura F., Mašek B. In: 24th International Conference on Metallurgy and Materials, TANGER spol. s r.o., 3.-5.6.2015, Ostrava, Czech Republic, pp. 1-7, ISBN 978-80- 87294-58-1

2014

  1. Microstcture of tool upon compined semi-solid processing and thermomechanical treatmentMašek, B.; Aišman, D.; Jirková, H. In: Journal of Alloys and Compounds, Vol. 586, Supplement: 1 (2014), pp. 265-167
  2. Transformation-Induced Plasticity in Steel for Hot Stamping. Mašek, B., Štádler, C., Jirková, H., Feuser, P., Selig, M. In: MATERIALI IN TECHNOLOGIJE, roč. 4, č. 48, s. 555-557. ISSN 1580-2949
  3. Modification of metastase microstrukture of CPM15V steel by heat exposure after treatment in semi-solid stateVančura, F.; Mašek, B.; Aišman, D.; Jirková, H.; Wagner, M.F-X. & Böhme, M. In: Journal of Alloys and Compounds, Vol. 586, Supplement: 1 (2014), pp. 159-164
  4. Mini-thixoforming of High-Alloyed CPM REX 121 Steel. Aišman, D.; Rubešová, K.; Mikmeková, Š. In: 4th International Conference on Advanced in Materials and Manufacturing Process (ICAMMP), Kurming, China, 18.-19.12.2013, Advanced Materials Research, 887-888, ISBN 1662-8985, pp. 257-261
  5. Apparatus for Bulge Testing Metal Foils Using a Laser Scanner. Káňa, J.; Mašek, B.; Jeníček, Š.; Ronešová, A. In: 24th DAAAM International Symposium on Intelligent Manufacturing and Automation (DAAAM 2014), Procedia Enginnering 69 (2014), 23.-26. 10. 2013, Zadar, Chorvatsko, ISSN 1877-7058, pp. 1029-1032, 10.1016/j.proeng.2014.03.086
  6. Design Q&P Process for Experimental Steel with 0.47% Carbon Content. Pileček, V.; Rubešová, K.; Mikmeková, Š. In: 4th International Conference on Advanced in Materials and Manufacturing Processes (ICAMMP), Kunming, China, 18. – 19. 12. 2013. Advanced Materials Research, 887-888, ISSN 1662-8985, pp. 257-261
  7. Mini-thixoforming of Variously Modified States of the Stock Structure of Tool Steel X210Cr12. Mašek, B., Vančura, F., Jirková, H., Böehme, M., Frint, P. In: MATERIALI IN TECHNOLOGIJE, 2014, roč. 6, č. 48, s. 875-880. ISSN: 1580-2949
  8. Influence of Metastable Retained Austenite on Macro and Micromechanical Properties of Steel Processed by the Q-P Process. Jirková, H.; Mašek, B.; Wagner, M. F.-X.; Langmajerová, D.; Kučerová, L.; Treml, R.; Kiener, D. In: Journal of Alloys and Compounds, 2014, Vol. 615, Supplement 1, s 163-168. ISSN: 0925-8388
  9. Modelling a Process chain of die Forging Process. Mašek, B.; Pileček, V.; Vančura, F.; Jirková, H. In: XXXIII. Verformungskundliches Kolloquium, Leoben, 15. - 18. 3. 2014, Buchmayer, B. (eds), Lehrstuhl für Umformtechnik, s. 72-76. ISBN: 978-3-902078-13-3
  10. Material-Technological Modelling of Closed Die Forging of 42CrMoS4 Steel. Pileček, V., Vančura, F., Jirková, H., Mašek, B. In: MATERIALI IN TECHNOLOGIJE, 2014, roč. 6, č. 48, s. 869-873. ISSN: 1580-2949
  11. Semi-Solid Processing of Powder Steels in Cryogenically-Cooled Die. Mašek, B.; Aišman, D.; Rubešová, K.; Jirková, H. In: Materials Science Forum, Vol. 783-786 (THERMEC 2014), ISSN: 1662-9752, pp. 801-806.
  12. Next High Strength Alloys for Light Weighting. Mašek, B.; Aišman, D.; Jirková, H.; Vorel, I. In: Entwicklungstrends in der Blechwarmumformung, Fraunhofer IWU, Chemnitz, 19. 3. 2014 - přednáška
  13. Innovative Konzepte für die Innenhochdruckumformung. Mašek, B.; Jirková, H.; Vorel, I. In: New Developments in Hydroforming, Německo, 13. 5. 2014, ISBN 978-3-88355-399-3, pp. 111-119
  14. New Material Concepts for Forgings. Mašek, B., Jirková, H. In: ACSME 2014. Santa Barbara Institute of Research Engineers and Doctors, 2014, s. 92-96. ISBN: 978-981-07-8859-9
  15. Various Approaches to Accelerated Carbide Spheroidization of 54SiCr Steel. Kučerová, L., Jirková, H., Mašek, B. In: Přínos metalografie pro řešení výrobních problémů, 2014, s. 14-20. ISBN: 978-80-01-05474-1
  16. Long Term Bainite Annealing. Bublíková, D., Kučerová, L., Jirková, H., Mašek, B. In: METAL 2014, Ostrava: TANGER spol. s r. o., 2014, s. 1-6. ISBN: 978-80-87294-52-9
  17. Semi-solid Processing of Metal-Oxide Composite. Jirková, H., Aišman, D., Svoboda, J., Mašek, B. In: METAL 2014, Ostrava: TANGER spol. s r. o., 2014, s. 1-6. ISBN 978-80-87294-52-9
  18. Mini-thixoforming of Unconventional Steels Produced by powder Metallurgy. Aišman, D., Pileček, V., Jeníček, Š. In: METAL 2014, Ostrava: TANGER spol. s r. o., 2014, s. 1-6. ISBN 978-80-87294-52-9
  19. Static Plate Load Tests on Multi - Layered Geocell - Reinforced Bed. Tafreshi, S. N. M., Khalaj, O., Dawon, A. R., Mašek, B. In: 10th International Conference of Geosynthetics (10ICG), Berlin, 2014 - přednáška
  20. Different Views on the Product Life Cycle. Kroták, S., Šimlová, M., Štádler, C. In: DESIGN 2014, Zagreb: Faculty of Mechanical Engineering and Naval Architecture, 2014, s. 1821-1830. ISSN: 1847-9073
  21. High-Strength Martensitic Steels with Low Ms Temperature. Bublíková, D., Mašek, B., Jirková, H., Jeníček, Š., Ibrahim, K., Čubrová, J. In: COMAT 2014. Ostrava: TANGER Ltd., 2014. s. 1-6. ISBN: 978-80-87294-45-1
  22. Combination of Internal High Pressure Forming and Q-P Process for Production of Hollow Products from AHS Steel. Mašek, B., Vorel, I., Jirková, H., Kůrka, P. In: COMAT 2014, Ostrava: TANGER, Ltd., 2014, s. 1-7. ISBN: 978-80-87294-45-1
  23. Optimisation of the Q-P Process Parameters for Low Alloyed Steels with 0,2% C. Jirková, H., Kučerová, L., Aišman, D., Mašek, B. In: Archives of Metallurgy and Materials, 2014, roč. 3, č. 59, s. 1205-1210. ISSN: 2300-1909
  24. The Effect of Alloying on Mechanical Properties of Advanced High Strength Steels. Kučerová, L., Jirková, H., Mašek, B. In: Archives of Metallurgy and Materials, 2014, roč. 3, č. 59, s. 1189-1192. ISSN: 2300-1909
  25. Tváření AHS oceli vnitřním přetlakem. Mašek, B., Vorel, I., Jirková, H., Kůrka, P. In: Kovárenství, č. 50, září 2014, s. 5-8. ISSN: 1213-9289
  26. Projekt Management Enriched by Engineering Design Science during the Design Process of a Technical Produkt. Kroták, S., Štádler, C., Šimlová, M., Jirková, H. In: ICDES 2014
  27. Effect of the Initial Microstructure on the Properties of Low-Alloyed Steel Upon Mini-thixoforming. Mašek, B., Aišman, D., Jirková, H. In: MATERIALI IN TECHNOLOGIJE, 2014, roč. 5, č. 48, s. 719-723. ISSN: 1580-2949

2013

  1. Semi-solid Processing of the Metal-Oxid Composite. Aišman, D.; Mašek, B.; Jirková, H.; Svoboda, J. In: ISMANAM 2013 - přednáška
  2. Mythen - oder wo wir uns in der FEM Simulation gerne täuschen lassen. Mašek, B. In: 6th formint Technology FORUM 2013 - přednáška
  3. Preparation of Bulk Fe-Based Metallic Glass Composites by Deformation in Semi-Solid State. Aišman, D.; Jirková, H.; Mašek, B.; Bublíková, P. In: ISMANAM 2013 - přednáška
  4. Významný projekt Technologické agentury České republiky pro České kovárenství. Vančura, F. In: Kovárenství, č. 46 / únor 2013, ISSN 1213-9289, pp. 58.
  5. Prototyping as a Tool for Rapid Development of Components for Sporting Equipment. Štádler, C.; Kroták, S.; Neuman, J.; Mašek, B. In: Advanced Materials Research, (METMG 2012), ISSN 1022-6680, pp 491-496.
  6. Micro-Compression Test of Thixoformed Austenite. Mašek, B.; Aišman, D.; Jirková, H.; Wurster, S. In: Solid State Phenomena, Vols. 192-193 (2013), pp. 215-218
  7. Mini-thixoforming of a Steel Produced by Powder Metallurgy. Jirková, H.; Aišman, D.; Sen, I.; Wagner, M. F.-X.; Behulova, M.; Kusy, M.; Masek, B. In: Solid State Phenomena Vols. 192-193 (2013), pp. 500-505
  8. Materiálově-technologické modelování vývoje struktury ve strategické části zápustkového kování. Vančura, F.; Pileček, V.; Bublíková, P.; Jirková, H.; Mašek, B. In: Kovárenství, č. 47 / květen 2013, ISSN: 1213-9289, pp. 114-117
  9. Nové koncepce výkovků pro budoucnost. Jirková, H.; Mašek, B. In: Kovárenství, č. 47 / květen 2013, ISSN: 1213-9289, pp. 52-56
  10. Optimization of Low-Temperature Thermo-Mechanical Treatment on 54SiCr Steel for Spheroidization of Carbides. Pileček, V.; Jirková, H.; Kučerová, L.; Mašek, B. In: 22nd International Conference on Metallurgy and Materials, 15. - 17. 5. 2013, Brno, Česká republika. Ostrava: TANGER, 2012. ISBN: 978-80-87294-39-0
  11. Low-Cost and Time-Saving Thermomechanical Treatment on 54SiCr Steel. Mašek, B.; Pileček, V. In: 8th Pacific Rim International Congress on Adnvaced Materials and Processing, 4. - 9. 8. 2013, in press
  12. Microstructure of X210Cr12 steel after the forming in semi-solid state visualized by very low energy SEM in ultra high vacuumMikmeková, Š.; Mašek, B.; Jirková, H.; Aišman, D.; Müllerová, I.; Frank, L. In: Applied Surface Science, Vol. 275, published: Jun 15 2013, pp. 403-408
  13. Energy-and Time-saving low-temperature Thermomechanical Treatment of Low-carbon plain Steel. Jirková, H.; Hauserová, D.; Kučerová, L.; MAšek, B. In: Materiali in Technologije, Vol. 47, Issue: 3 (2013), pp. 335-339
  14. New Technological Concepts of Long Products based on HDQT - High Deformation Quenching and Tempering System. Mašek, B.; Borowikow. A.; Jirková, H.; Jeníček, Š.; Bublíková, P. In: 9th International ROLLING Conference & 6th European ROLLING Conference 2013, ISBN: 978-88-85298-95-8
  15. Q-P proces on the Steels with variol Carbon and Chronium Content. Jirková, H.; Kučerová, L. In: The 8th Pacific Rim International Congress on Advanced Materials and Processing, 4.-8.8.2013, ISBN: 978-0-470-94309-0, pp. 819-824
  16. Mini-thixoforming of tool Steel X210Cr12. Mišterová, H.; Ronešová, A.; Jeníček, Š. In: 22nd International Conference on Metallurgy and Materials, 15.-17.5.2013, Brno, Česká Republika, Ostrava: TANGER, 2013, ISBN: 978-80-8729-39-0, pp. 341-345
  17. A new Development in Thermo-mechanical Processing of Trip Steels. Kučerová, L.; Jirková, H.; Průcha, V.; Pileček, V. In: 22nd International Conference on Metallurgy and Materials, 15.-17.5.2013, Brno, Česká Republika, Ostrava: TANGER, 2013, ISBN: 978-80-8729-39-0, pp. 542-547

2012

  1. The influence of deformation and cooling parameters after transition through semi-solid state on structure development of ledeburite steel. Aišman, D.; Jirková, H.; Mašek, B.in: Journal of Alloys and Compounds, Vol. 536, Supplement 1, pp. S204-S207, doi:10.1016/j.jallcom.2012.02.028
  2. Carving, Metalforming and EDS – Three Extreme Inspirations for one Result. Mašek, B.; Kroták, S.; Neuman, J.; Štádler, C. in: XXXI. Verfomungskundliches Kolloquium, Planneralm, Österreich, pp. 41-44, Buchmayer, B. (eds), Lehrstuhl für Umformtechnik, Leoben, ISBN 978-3-902078-17-9, 2012
  3. Rapid Spheroidization and Grain Refinement Caused by Thermomechanical Treatment for Plain Structural Steel. Mašek, B.; Jirková, H.; Kucerová, L.in: Materials Science Forum, Vols. 706-709 (2012), pp. 2770-2775
  4. Effect of Quenching and Partitioning Temperatures in the Q-P Process on the Properties of AHSS with Various Amounts of Manganese and Silicon. Jirková, H.; Kucerová, L.; Mašek, B.in: Materials Science Forum, Vols. 706-709 (2012), pp. 2734-2739
  5. Development of Microstructure from Powder Tool Steel Obtained through Semi-solid Metal Working. Mašek, B.; Aišman, D.; Jirková, H.; Kusý, M.in: Metal 2012, Ostrava: TANGER, 2012. ISBN: 978-80-254-8683-2
  6. The Influence of the Temperature of the Processing on the Final Structure of the Metal-Ceramic Compact Obtained through the Semi-Solid State. Eliášová, I.; Mašek, B.; Kusý, M.; Svoboda, J.; Jirková, H.in: Metal 2012, Ostrava: TANGER, 2012. ISBN: 978-80-254-8683-2
  7. The effect of advanced thermomechanical treatments on mechanical properties of low-alloyed high strength steels Jirková, H.; Kucerová, L.; Prucha, V.; Mašek, B.in: Metal 2012, Ostrava: TANGER, 2012. ISBN: 978-80-254-8683-2
  8. Determination of Material Characteristics of Dynamically Stressed High-Strength Steel Jenícek, Š.; Jirková, H.; Mašek, B.in: Metal 2012, Ostrava: TANGER, 2012. ISBN: 978-80-254-8683-2
  9. Micro-Compression Test of Thixoformed AusteniteMašek, B.; Aišman, D.; Jirková, H.; Wurster, S.in: Solid State Phenomena, Vols. 192-193 (2013), pp. 215-218
  10. Mini-thixoforming of a Steel Produced by Powder MetallurgyJirková, H.; Aišman, D.; Sen, I.; Wagner, M. F.-X.; Behulova, M.; Kusy, M.; Masek, B.in: Solid State Phenomena Vols. 192-193 (2013), pp. 500-505
  11. Microstructure and Mechanical Behavior of a Mini-Thixoformed Tool SteelSen, I.; Jirkova, H.; Masek, B.; Böhme, M.; Wagner, M. F.-X.In: Metallurgical and Materials Transactions A, DOI: 10.1007/s11661-012-1305-3, ISSN 1073-5623
  12. Straw, Explosion and AHS Steel – Three Inspirations, One ResultMašek, B.; Urbánek, M.; Hronek, P.; Štádler, C.; Nesvadba, P.In: Kovárenství 44, zárí 2012, pp. 5-8, ISSN 1213-9289
  13. Prototyping as a Tool for Rapid Development of Components for Sporting EquipmentŠtádler, C.; Kroták, S.; Neuman, J.; Mašek, B.in: Advanced Materials Research Vol. 628 (2013), pp. 491-496
  14. Innovative Concepts for Hot Stamping ProcessMašek, B.; Jirková, H.; Kucerová, L.; Aišman, D.; Eliášová, I.; Zemko, M.in: Journal of the University of Applied Sciences Mittweida Wissenschaftliche Zeitschrift der Hochschule Mittweida, IWKM 2012, Nr. 4, 2012, pp. 42-45, ISSN 1437-7624.
  15. The behavior of low-alloy high-strength steel after different types of processing for dynamic loadJenícek, Š.; Mašek, B.; Kucerová, L.in:Journal of the University of Applied Sciences Mittweida Wissenschaftliche Zeitschrift der Hochschule Mittweida, IWKM 2012, Nr. 4, 2012, pp. 26-28, ISSN 1437-7624.
  16. Microstructure development and properties obtained by forming in semi-solid state of powder metallurgical produced steelMašek, B.; Aišman, D.; Jirková, H.in: Journal of the University of Applied Sciences Mittweida Wissenschaftliche Zeitschrift der Hochschule Mittweida, IWKM 2012, Nr. 4, 2012, pp. 29-31, ISSN 1437-7624.
  17. New Innovative Concepts for Using Modern High-Strength Steels in Metal Forming Mašek, B.in: Journal of the University of Applied Sciences Mittweida Wissenschaftliche Zeitschrift der Hochschule Mittweida, IWKM 2012, Nr. 4, 2012, pp. 11-14, ISSN 1437-7624.
  18. Influence of Chromium and Manganese on Mechanical Properties of Low Alloyed High Strength Steels with Retained Austenite Processed by Modern Methods of Thermomechanical Treatment Jirková, H.; Klokan, M.; Kučerová, L.; Mašek. B.in: 2nd International Conference on Recent Trends in Structural Materials, November 21st - 22nd 2012 Parkhotel Plzen,Tanger Ltd., Ostrava, ISBN 978-80-87294-34-5
  19. Unconventional Heat and Thermo-Mechanical Treatment of Steel with High Content of Metastable Austenite Gained in Semi-Solid State Aišman, D.; Mašek, B.; Jirková, H.in: 2nd International Conference on Recent Trends in Structural Materials, November 21st - 22nd 2012 Parkhotel Plzen,Tanger Ltd., Ostrava, ISBN 978-80-87294-34-5
  20. Improvement of Cold Formability of Spring Steel by Low-Temperature Thermo-Mechanical Processing Kučerová, L.; Jirková, H.; Štádler, C.; Mašek. B.in: J2nd International Conference on Recent Trends in Structural Materials, November 21st - 22nd 2012 Parkhotel Plzen,Tanger Ltd., Ostrava, ISBN 978-80-87294-34-5
  21. The Potential of Steels with High Content of Vanadium and Chromium Produced by Powder Metallurgy for Processing by the Mini-thixoforming Mišterová, H.; Jirková, H.; Aišman, D.; Mašek, B.in: 2nd International Conference on Recent Trends in Structural Materials, November 21st - 22nd 2012 Parkhotel Plzen,Tanger Ltd., Ostrava, ISBN 978-80-87294-34-5
  22. Application of the Unconventional Thermomechanical Treatment on Low-Alloyed High-Strength SteelLangmajerová, D.; Jirková, H.; Mikmeková, Š.; Mašek, B.in: 2nd International Conference on Recent Trends in Structural Materials, November 21st - 22nd 2012 Parkhotel Plzen,Tanger Ltd., Ostrava, ISBN 978-80-87294-34-5

2011

  1. Metastable structure of austenite base obtained by rapid solidification in a semi-solid stateAišman, D.; Jirková, H.; Kucerová, L.; Mašekin: Journal of Alloys and Compounds 509S (2011) S312–S315
  2. Analyses of testing stand for radial hydraulic forging machineMašek, B.; Hronek, P.; Štádler, C.in: Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium, ISBN 978-3-901509-83-4, ISSN 1726-9679, pp 631-632, Editor Katalinic B., Published by DAAAM International, Vienna, Austria 2011
  3. Refinement of TRIP Steel Microstructure by Incremental DeformationJirkova, H.; Kucerova, L.; Masek, B. & Meyer, L. W.in: Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium, ISBN 978-3-901509-83-4, ISSN 1726-9679, pp 0025-0026, Editor Katalinic B., Published by DAAAM International, Vienna, Austria 2011
  4. The behavior of low-alloy high-strength steel after different types of processing for dynamic loadJenícek, Š.; Jirková, H.; Kucerová, L.; Mašek, B.in: Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium, ISBN 978-3-901509-83-4, ISSN 1726-9679, pp 593-594, Editor Katalinic B., Published by DAAAM International, Vienna, Austria 2011
  5. Use the hydroforming by produced the pad for extreme carving Kroták, S.; Mašek, B.; Urbánek, M.in: Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium, ISBN 978-3-901509-83-4, ISSN 1726-9679, pp 1279-1280, Editor Katalinic B., Published by DAAAM International, Vienna, Austria 2011
  6. Preparation of metallic-ceramic compact by transition trough semi-solid stateEliášová, I.; Jirková, H.; Kusý, M.; Mašek, B.; Svoboda, J.in: Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium, ISBN 978-3-901509-83-4, ISSN 1726-9679, pp 1285-1286, Editor Katalinic B., Published by DAAAM International, Vienna, Austria 2011
  7. Influence of the Surface Quality on the Stress State During Rotary Bending TestMalina, J.; Mašek, B.; Behúlová, M.in: Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium, ISBN 978-3-901509-83-4, ISSN 1726-9679, pp 123-124, Editor Katalinic B., Published by DAAAM International, Vienna, Austria 2011
  8. Minithixoforming of high chromium tool steel X210Cr12 with various initial statesMašek, B.; Vancura, F.; Aišman, D.; Jirková, H.in: Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium, ISBN 978-3-901509-83-4, ISSN 1726-9679, pp 1307-1308, Editor Katalinic B., Published by DAAAM International, Vienna, Austria 2011
  9. Combined effect of deformation and diffusion hold applied close to A1 temperature on carbide distribution in RSt37-2 steelKucerová, L.; Jirková, H.; Jandová, D.; Mašek. B.in: Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium, ISBN 978-3-901509-83-4, ISSN 1726-9679, pp 517-518, Editor Katalinic B., Published by DAAAM International, Vienna, Austria 2011
  10. Straw, Explosion and AHS Steel – Three Inspirations, One ResultMašek, B.; Urbánek, M.; Hronek, P.; Štádler, C.; Nesvatba, P.in: XXX. Verfomungskundliches Kolloquium, Planneralm, Österreich, p. 139-142, Buchmayer, B. (eds), Lehrstuhl für Umformtechnik, Leoben, ISBN 978-3-902078-15-5, 2011
  11. Mikrostrukturní rozbor oceli 42SiCr zpracované Q-P procesemKucerová, L.; Jirková, H.; Hauserová, D.; Mašek, B.in: Strojírenská technologie casopis pro vedu, výzkum a výrobu, 2011, roc. 16, c. 1, s. 49-54. ISSN 1211-4162
  12. Material-technological Modelling of Real Thin Sheet Rolling ProcessMašek, B.; Jirková, H.; Kučerová, L.; Ronešová, A.; Malina, J.in: METAL 2011, Ostrava : TANGER, 2011. ISBN: 978-80-254-8683-2
  13. The Role of a Cooling Rate in Thermo-mechanical Treatment with Incorporated Q-P ProcessMašek, B.; Kučerová, L.; Jirková, H.; Klauberová, D.in: METAL 2011, Ostrava : TANGER, 2011. ISBN: 978-80-254-8683-2
  14. Relationship between Initial and Resulting Microstructure of X210Cr12 Steel pon Short-term Semi-solid State ProcessingMašek, B.; Vančura, F.; Aišman, D.; Jirková, H.in: METAL 2011, Ostrava : TANGER, 2011. ISBN: 978-80-254-8683-2
  15. Processing of powder Fe - Al - Al2O3 deformation in semi solid state with rapid solidificationMašek, B.; Svoboda, J.; Eliášová, I.; Kusý, M.; Jirková, H.in: METAL 2011, Ostrava : TANGER, 2011. ISBN: 978-80-254-8683-2
  16. Influence of Cavity Shape and Entry Hole on Minithixoforming Aišman, D.; Jirková, H.; Behulová, M.; Mašek, B.in: METAL 2011, Ostrava : TANGER, 2011. ISBN: 978-80-254-8683-2
  17. Thermomechanical Simulation of the Service Load Transients of Hot Forging Tools Neugebauer. R.; Avila, M.; Mašek, B. in: 8. Conference of the Czech Forging Institute, Kovárenství 41/2011, p. 27-30, ISSN 1213-9289
  18. Controlled Cooling of Steel Die ForgingsMašek, B.; Vančura, F.; Jeníček, Š.in: 8. Conference of the Czech Forging Institute, Kovárenství 41/2011, ISSN 1213-9289
  19. New Innovative Concepts for Using Modern High-Strength Steels in Metal FormingMašek, B.in: International Conference New Development in Forging Technology, Liewald M.(eds), MAT INFO Werkstoff-Informationsgesellschaft mbH, Frankfurt, p. 241-269, Stuttgart, Germany, ISBN 987-3-88355-386-3
  20. Comparison of Microstructures and Properties Obtained after Different Heat Treatment Strategies of High Strength Low Alloyed SteelKučerová, L.; Jirková, H.; Hauserová, D.; Mašek, B.In: Journal of Iron and Steel Research International, Volume 18, Supplement 1-1, p. 427-431, May 2011, ISSN 1006-706X
  21. Improvement of Mechanical Properties of automotive Components Using Hot Stamping with Integrated Q-P ProcessMašek, B.; Jirková, H.; Kučerová, L.; Zemko, M.In: Journal of Iron and Steel Research International, Volume 18, Supplement 1-2, p. 730-734, May 2011, ISSN 1006-706X
  22. Material-technological Modelling of Various Holding Times at the Partitioning Temperature in AHSS with Different Alloying StrategiesMašek, B.; Jirková, H.; Kučerová, L.; Klauberová, D.in: 3rd International Conference on Heterogeneous Material Mechanics - ICHMM-2011, May 2011, Shanghai, China
  23. Comparison of the Results Obtained by Q-P Process and Conventional Quenching and Tempering Kucerova L., Jirkova H., Hauserova D., Masek B.in: 12. česko-slovenské konference Přínos metalografie pro řešení výrobních problémů, Lázně Libverda, 14-16.červen 2011, ČVUT v Praze a Výzkumný a zkušební ústav Plzeň s.r.o. (eds.), Česká technika – nakladatelství ČVUT Praha, 2011, p. 51-54, ISBN 978-80-01-04822-1
  24. Fatigue Properties of a Low Alloy 42SiCr Steel Heat Treated by Quenching and Partitioning ProcessCerný, I; Mikulová, D.; Sís, J.; Mašek, B.; Jirková, H.; Malina, J.in: Procedia Engineering 10 (2011), p. 3310-3315, ISSN 1877-7058
  25. Innovative Concepts for Hot Stamping ProcessMašek, B.; Jirková, H.; Kucerová, L.; Aišman, D.; Eliašová, I.; Zemko, M.in: Steel Research International, Special Edition – 10th International conference on Technology of Plasticity-ICTP 2011, Aachen, Germany, Hirt, G. and Tekkaya A. E. (eds), Wiley-VCH Verlag GmbH & Co. KGaA. Weinheim, p. 423-428, ISBN 978-3-514-00784-0
  26. Modelling of complicated production processes – new possibilities for optimisation of rolling technologies Mašek, B.; Jirková, H.; Ronešová, A.; Jenícek, Š.; Malina, M.in: Ocelové Pásy 2011, Stará Lesná, Slovensko, 4.-6.11. 2011, p. 159-162, Kvackaj, T. (eds), Spolecnost Ocelové pásy 2011, ISBN 978-80-260-0539-1
  27. Elimination of hot cracks during the hot rolling of 79NiFeMo5 alloy with support of material-technological modelling Mašek, B.; Jirková, H.; Ronešová, A.; Malina, M.; Kucerová, L.in: Ocelové Pásy 2011, Stará Lesná, Slovensko, 4.-6.11. 2011, p. 253-258, Kvackaj, T. (eds), Spolecnost Ocelové pásy 2011, ISBN 978-80-260-0539-1

2010

  1. Alternative Explosion-Formed Joint of High-Strength Tube and SleeveMašek, Bohuslav; Urbánek, Miroslav; Nesvadba, Petr; Hronek, Pavel in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 1181-1182, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5
  2. Alternativní spoj vysokopevné trubky s objímkou vytvořený výbuchemUrbánek, Miroslav; Hronek, Pavel; Nesvadba, Petr; Mašek, Bohuslavin: 1st International Conference about Recent Trends in Structural Materials, pp. 205 – 211, Pilsen, Czech Republic, 2010, ISBN 978-80-254-8683-2
  3. Fatigue Life Improvement by Thermo-mechanical Treatment of 34CrNiMo6 SteelDžugan, J.; Nový, Z. ; Motyčka, P.; Martínková; J., Martínek, Pin: Proceedings of International Conference on Advanced Steels 2010: Metallurgical Industry Press, China, ISBN 978-7-5024-5423-4
  4. Mini-thixoforming Tool Steel X210Cr12Aišman, D.; Jirková, H.; Mašek, B.in: 1st International Conference about Recent Trends in Structural Materials, pp. 135 – 139, Pilsen, Czech Republic, 2010, ISBN 978-80-254-8683-2
  5. Unconventional Thermomechanical Treatment of Advanced High Strength Low-alloyed SteelMašek, B.; Jirková, H.; Klauberová, D.; Petrenec, M.; Beran, P. in: 1st International Conference about Recent Trends in Structural Materials, pp. 173-179, Pilsen, Czech Republic, 2010, ISBN 978-80-254-8683-2
  6. Influence of Initial Pearlite Morphology on the Resulting Structure and Distribution of Deformation after Cold Flow Forming ProcessMalina, J.; Jirková, H.; Mašek, B.in: 1st International Conference about Recent Trends in Structural Materials, pp. 167 – 172, Pilsen, Czech Republic, 2010, ISBN 978-80-254-8683-2
  7. Steel and What We Still Do not Know about ItMašek, B.in: 1st International Conference about Recent Trends in Structural Materials, pp. 129 - 134, Pilsen, Czech Republic, 2010, ISBN 978-80-254-8683-2
  8. Materiálově-technologické modelování – cesta ke snížení nákladů při vývoji válcovacích procesůMašek, B.; Jirková, H.; Štádler, C.in: 68. pracovní seminář společnosti Ocelové pásy - "Rekonstrukce a modernizace výrobních strojů a zařízení se zaměřením na válcování", Česká republika, 2010
  9. Miniaturization in ThixoformingMašek, B.; Aišmnan, D.; Hronek, P.; Jirková, H.; Jeníček, Š.in: Science Journal, 2010, Nr. 4, MKČR 7645, p.224-227, ISSN 1803-1269
  10. Microstructure and Phase Composition of Steel X210Cr12 after the Forming in Semi-Solid StateAišman, D.; Behúlová, M.; Jirková, H.; Mašek, B.in: 23rd International Conference on Heat Treatment, November 2010, Jihlava, Czech Republic, ISBN 978-80-904462-3-6
  11. Mikrostrukturní rozbor oceli 42SiCr Kučerová, L.; Jirková, H.; Hauserová, D.; Mašek, B. in 1. Mezinárodní konference Mikroskopie a nedestruktivní zkoušení materiálu, Litoměřice: FVTM UJEP Ústí n.L.,s. 1-10, 2010, ISBN: 978-80-7414-280-2
  12. The Material-technological Modelling of the Real Dynamic Process Mašek, B.; Jirková, H.; Malina, J.; Klauberová, D.in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 169-170, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5
  13. Influence of Deformation Intensity and Cooling Parametrs on Microstructure Development in QP ProcessKlauberová, D.; Jirková, H.; Kučerová, L.; Mašek, B.; Hauserová, D.; Jeníček, Š.in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 743-744, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5
  14. Measurement Method for Determination of Material Properties in Condition of Rapid Heating andHigh Deformation Rates Jeníček, Š.; Mašek, B. in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 825-826, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5
  15. Influence of Low Temperature Thermomechanical Treatment on Carbide Morphology of RSt37-2 Steel Jirková, H.; Kučerová, L.; Malina, J.; Hauserová, D.; Aišman, D.; Mašek, B.in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 25-26, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5
  16. FEM Analyses of Connections for Several Structures of a Hydraulic Radial Forging Machine Mašek, B.; Hronek, P.; Štádler, C.in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 885-886, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5
  17. The Influence of Incremental Deformation of AHSS on Stabilisation of Retained AusteniteKučerová, L.; Klauberová, D.; Hauserová, D.; Mašek, B.in: Proceedings of 2nd International Conference Super-High Strength Steels, Italy, 2010, ISBN 978-88-85298-79-8
  18. Miniaturization in ThixoformingMašek, B.; Aišman, D.; Jirková, H.; Kučerová, L.in: Kovárenství, Vol. 38, September 2010, ISSN 1213-9289
  19. Structure of Miniature Components from Steel Produced by Forming in Semi-Solid StateMašek, B.; Aišman, D.; Behulová, M.; Jirková, H. in: Trans. Nonferrous Met. Soc. China 20 (2010), Vol. 20, pp 1037-s1041, ISSN: 1003-6326
  20. Unconventional Thermomechanical Treatment of Advanced High Strength Low-Alloy Steel Mašek B., Jirková H., Klauberová D., Petrenec M., Beran P.in: Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering, pp. 435-440, Tallinn, 2010, ISBN/ISSN 978-9985-59-982-2.
  21. Fatigue Properties of Thin Wall Semi-Products Produced By Incremental Forming Processes.Masek, B.; Malina, J.; Cerny I.; Cipera M.; Hronek, P.; Jenicek, S.in: Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering, pp. 215-220, Tallinn, 2010, ISBN/ISSN 978-9985-59-982-2.
  22. The Effect of Mn and Si on the Properties of Advanced High Strength Steels Processed by Quenching and PartitioningMašek, B.; Jirková, H.; Hauserová, D.; Kučerová, L.; Klauberová, D.in: Materials Science Forum Vols. 654-656 (2010), pp 94-97
  23. Advanced Material-Technological Modelling of Complex Dynamic Thermomechanical ProcessesMašek, B.; Jirková, H.; Malina, J.; Jeníček, Š.in: Materials Science Forum Vols. 654-656 (2010), pp. 1594-1597
  24. Analysis of 42SiCr steel after Quenching and Partitioning by Laser Scanning Confocal Microscopy Kučerová, L.; Jirková, H.; Hauserová, D.; Mašek, B.in: Proceedings of METAL 2010 - 19. Mezinárodní konference metalurgie a matariálů, pp. 83, 2010, ISBN/ISSN 978-80-87294-15-4.
  25. Enhancing the Efficiency of Recycling White Bronze Chips Jeníček, Š.; Aišman, D.; Jirková, H.; Mašek, B.in: Proceedings of METAL 2010 - 19. Mezinárodní konference metalurgie a matariálů, pp. 107, 2010, ISBN/ISSN 978-80-87294-15-4.
  26. Fatigue and Mechanical Properties of Thin Wall Semi-products Produced by Incremental Forming Processes Malina, J.; Mašek, B.; Černý, I.; Čipera, M.; Mikulová, D. in: Proceedings of METAL 2010 - 19. Mezinárodní konference metalurgie a matariálů, pp. 45, 2010, ISBN/ISSN 978-80-87294-15-4.
  27. Project of Unconventional Technological Process Chain for the Production of Hollow Semi-products from Low-alloyed TRIP Steel in Steel Innovation Award 2009Mašek B., Jirková H., Meyer L., Malina J., Kučerová L.in: Proceedings of METAL 2010 - 19. Mezinárodní konference metalurgie a matariálů, pp. 45, 2010, ISBN/ISSN 978-80-87294-15-4.
  28. Unconventional Structure of X210Cr12 Steel Obtained by Thixoforming Jirková, H.; Aišman, D.; Mašek B.in: Journal of Alloys and Compounds, Journal of Alloys and Compounds 504S (2010) S500–S503, ISSN: 0925-8388
  29. Numerical Simulation of Induction Heating of a Rod Semiproduct for the Process of Rotary Spin ExtrusionBehúlová, M.; Mašek, B.; Meyer, L. W in: Kovové materiály, Vol. 48 (2010), No. 5, pp. 327 – 336, Bratislava: SAP-Slovak Academic Press, ISSN 0023-432X
  30. Thixoforming von Stahl - ein bisher unerforschtes Verfahren mit großem Potenzialauthors:Mašek, B.; Jirková, H.; Aišman, D.; Hronek, P. in: XXIX. Verformungskundliches Kolloquium, Planneralm, Österreich, ISBN 978-3-902078-14-8, März 2010

2009

  1. Material-technology Modelling the Development of Structures in Wires during Controlled Cooling on Industrial Cooling Conveyors Mašek, B.; Jirková, Malina, J.; Ronešová, A.in: Proceedings of the XXVIII. Verformungskundliches Kolloquim, 2009, Östereich, ISBN: 978-3-902078-11-7
  2. Hydraulický stroj pro flexibilní radální tváreníMašek, B.; Hronek, P.; Bubák, A.; Štádler, C.in: 7. kovárenská konference „Mechanizace a automatizace v kovárnách“, Brno, 13.-14.5.2009, CZ
  3. New Possibilities in Material-Technological Modelling for Real Rolling Technology Production ChainsMašek, B.; Jirková, H.; Malina, J.; Ronešová, A.in: Proceedings of the 5th European Rolling Conference, June 2009, England
  4. Heat Treatment with Local Distribution of Carbon for Stabilizing Retained AusteniteAišman, D.; Jirková, H.; Kucerová, L.; Mašek, B.in: 8. Industriefachtagung „Oberflächen- und Wärmebehandlungstechnik“ und 12. Werkstofftechnischen Kolloquium, pp. 229-235, ISSN 1439-1597, ISBN 978-3-00-029007-1
  5. Optimization of Technological Parameters of Flow Forming ProcessMalina, J.in: SVOC 2009, Západoceská univerzita v Plzni, 2009, ISBN 978-80-7043-795-7
  6. Influence of Austenitization Temperature and Number of Incremental Steps on Structure Development of TRIP-SteelJirková, H.; Rezek, M.; Meyer, L. W.; Mašek, B.in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1461-1462, ISSN 1726-9679, ISBN 978-3-901509-70-4
  7. Optimization of Recycling of White Bronze ChipsJenícek, Š.; Jirková, H.; Kucerová, L.; Mašek, B.in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1135-1136, ISSN 1726-9679, ISBN 978-3-901509-70-4
  8. Forming Technology of Small Parts in Semi–solid StateAišman, D.; Jirková, H.; Mašek, B.in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1895-1896, ISSN 1726-9679, ISBN 978-3-901509-70-4
  9. Achieving an Excellent Combination of Mechanical Properties in Multiphase Steels by Controlled Development of MicrostructureKlauberová, D.; Jirková, H.; Malina, J.; Mašek, B.in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1157-1158, ISSN 1726-9679, ISBN 978-3-901509-70-4
  10. Influence of the Forming Conditions on the Mechanical Properties of the Final Product, when Using the Flow Forming ProcessMalina, J.; Jirková, H.; Mašek, B.in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1719-1720, ISSN 1726-9679, ISBN 978-3-901509-70-4
  11. Optimization of Q-P Process Parameters with Regard to Final Microstructures and PropertiesKucerová, L.; Aišman, D.; Jirková, H.; Hauserová, D.in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1035-1036, ISSN 1726-9679, ISBN 978-3-901509-70-4
  12. Investigation of Phase Transformations in High-strength Low-alloyed SteelHauserová, D.; Jirková, H.; Mašek, B.in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1897-1898, ISSN 1726-9679, ISBN 978-3-901509-70-4
  13. Possibilities for Enhancing Pressing Force of Pull Down Hydraulic PressMašek, B.; Hronek, P.; Štádler, C.in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1917-1918, ISSN 1726-9679, ISBN 978-3-901509-70-4
  14. Improvement of fatigue life of 34CrNiMo6 steel by thermomechanical treatmentDžugan, J., Nový, Z., Sosnová, M.in: Advances in Material and Processing Technologies, AMPT 2009, 26-29 October, Kuala Lumpur, Malaysia
  15. Únavová odolnost cementovaných a necementovaných trubek s defekty na vnitrním povrchuCipera M., Cerný I., Pospíchal V., Mikulová D., Fürbacher I.in: SEMDOK 2010, Terchová, Slovensko
  16. Computer Aided Design and Analysis of Dynamic Induction HeatingBehúlová, M.; Mašek, B.; Meyer, L.W.in: Proceedings of the 4th international conference on manufacturing science and education, Vol.I, II. Romania, Sibiu, June 2009, ISSN 1843-2522

2008

  1. Einsatz von preisgünstig legierten hochfesten Stählen für die unkonventionelle thermomechanische Herstellung von Hohlteilen Mašek, B.; Klauberová, D.; Staňková, H.; Malina, J.; Glass, R.; Meyer, L. W.in: XXVII. Verformungskundliches Kolloquium, Planneralm, Österreich, ISBN 978-902078-09-07, März 2008
  2. Vliv tepelného zpracování na vlastnosti vysocepevné nízkolegované oceliAišman, D.in: SVOC 2008, Západoceská univerzita v Plzni, 2008, ISBN 978-80-7043-667-1
  3. Einfluss der thermomechanischen Behandlung mit inkrementellen Deformationen auf die Eigenschaften von TRIP-StählenStanková, H.in: SVOC 2008, Západoceská univerzita v Plzni, 2008, ISBN 978-80-7043-667-1
  4. FEM Modeling of Hose Spring ClampHronek, P.; Štádler, C.; Mašek, B.; Chval, Z.in: 2nd International Conference ERIN 2008, Bratislava, Slovak Republic, 23. – 24. 4. 2008, ISBN 978-80-227-2849-2
  5. Dosahování vynikajících kombinací mechanických vlastností u vícefázových ocelí rízeným vývojem mikrostrukturyMašek, B.; Klauberová, D.; Staňková, H.; Malina, J.in: 11. konference: Prínos metalografie pro rešení výrobních problému, cerven 2008, ISBN 978-80-01-04039-3
  6. Možnosti a využití laserové rádkovací konfokální mikroskopieSkálová, L.; Staňková, H.; Mašek, B.in: 11. konference: Prínos metalografie pro rešení výrobních problému, cerven 2008, ISBN 978-80-01-04039-3
  7. Modelling Structure Development with High Gradient of the Changes in Physical Parameters Mašek, B.; Staňková, H.; Klauberová, D.; Ronešová, A.in: Second Internatinal Conference on Heterogeneour Material Mechanics, pp. 390-393, June 2008, China, ISBN 978-1-932078-80-0
  8. Influence of Thixoforming on Structure Development of the Tool SteelStanková, H.; Klauberová, D.; Ronešová, A.; Mašek, B.in: 12th International Research/Expert Conference – TMT 2008, Turkey, 26. – 30. August, 2008
  9. Optimization of Recycling Process of White Bronyze ChipsSkálová, L.; Luka, J.; Mašek, B.in: 12th International Research/Expert Conference – TMT 2008, Turkey, 26. – 30. August, 2008
  10. Konstrukce manipulacních kleští pro robota na kovárském pracovištiHlavác, J.; Duník, M.; Štádler, C.; Mašek, B.in: 49. Konference cástí a mechanismu stroju, Srní, Ceská republika, 8.-10. 9. 2008
  11. Zkouška mezní tvaritelnosti na vzorcích s nákružkemHrdá, K.; Zemko, M.; Malina, J.; Jirková, H.; Mašek. B.in: Kovárenství 2008, roc. 9, c.33, s.111-114, ISSN 1213-9289
  12. The Most Recent Findings from Physical-Material Modelling of UHSS Structure Development on a Thermomechanical SimulatorMašek, B.; Stanková, H.; Klauberová, D.; Skálová, L.in: 3rd International Conference on Thermomechanical Processing of Steel, Italy, September 2008
  13. Analysis of Hydraulic Forging Press Structure and its LimitsHronek, P.; Štádler, C.; Mašek, B.in: 6th International Conference on Computer Aided Design and Manufacturing CADAM 2008, pp. 19 - 20, Croatia, September 16 – 20, 2008, ISBN 978-953-7142-36-0
  14. The Influence of Thermomechanical Treatment of TRIP Steel on its Final MicrostructureMašek, B.; Stanková, H.; Nový, Z.; Meyer, L. W.; Kracík, A.in: Journal of Materials Engineering and Performance, Vol. 18, No. 4, June 2009, ISSN 1544-1024
  15. Analysis of the Influence of Surface Layer on the Final Stress State of a SpecimenMalina, J.; Behúlová, M.; Mašek, B.in: Materials Science and Technology [online]. 2008, vol. 6., ISSN 1335-9053
  16. Influence of Technological Parameters on the Final Product when Using Flow Forming Process Malina, J.; Jirková, H.; Mašek, B.in: Proceedings of the 19th International DAAAM Symposium, 2008, Vol. 19, No. 1, pp. 783-784, ISSN 1726-9679
  17. Testing the Influence of the Q-P Process on the Development in High Strength Low-alloyed SteelsAišman, D.; Jirková, H.; Skálová, L.; Mašek, B.in: Proceedings of the 19th International DAAAM Symposium, 2008, Vol. 19, No. 1, pp. 007-008, ISSN 1726-9679
  18. Improvement of mechanical properties of high strength low-alloyed steel by unconventional heat treatmentMašek, B.; Jirková, H.; Aišman, D.; Skálová, L.in: Proceedings of the 5th International Scientific Conference of Mechanical Engineering, COMEC 2008, Cuba, 2008, ISBN 978-959-250-404-2
  19. Konfokální mikroskopie pro výzkum i praxiSkálová, L.; Malina, J.; Aišman, D.in: Setkání uživatelu konfokálního mikroskopu LEXT, Lednice 2008
  20. Retained austenite evaluation in high strength steelsS. Nemecek , Z. Nový , J. Uhlír , J. Janovec , M.in: Proceedings of the international conference “New developments on metallurgy and aplications of high strength steels”. 26.-28. 5. 2008, Buenos Aires, Argentina

2007

  1. Influence of Thixoforming on Structure Development of the Tool Steel Staňková, H.; Klauberová, D.; Ronešová, A.; Mašek, B.in: Archives of Materials Science, Vol. 28, No. 1-4 (2007), pp. 149-154, ISSN 1734-9885
  2. Optimization of Recycling Process of White Bronze ChipsSkálová, L.; Luka, J.; Mašek, B.in: Archives of Materials Science, Vol. 28, No. 1-4 (2007), pp. 143-148, ISSN 1734-9885
  3. Integration des interkritischen Glühens in eine Umformprozesskette für die Herstellung von HohlteilenMašek, B.; Staňková, H.; Malina, J.; Glass, R.; Meyer, L. W.in: XXVI. Verformungskundliches Kolloquium, Planneralm, Österreich, pp. 217-224, ISBN 978-902078-09-04, März 2007
  4. Application of FEM simulation for the support of design and optimisation of froming processMašek, B.; Behúhlová, M.; Mahn, U.; Meyer, L. W.in: XXVI. Verformungskundliches Kolloquium, Planneralm, Österreich, pp. 217-224, ISBN 978-902078-09-04, März 2007
  5. Analyse des Einflusses der Eigenspannung und des Oberflächenreliefs auf die Spannungsverteilung unter Anwendung von FEM Simulation Malina, J.; Behúhlová, M.; Staňková, H.; Mašek, B.in: XXVI. Verformungskundliches Kolloquium, Planneralm, Österreich, pp. 217-224, ISBN 978-902078-09-04, März 2007
  6. Utilisation of laser confocal microscope Olympus LEXT for the analysis of the fracture area of fine grain steelStaňková, H.; Skálová, L.; Jacková, K.; Mašek, B.in: Focus on Microscopy - FOM 2007, Valencia, Spain, April 2007
  7. Advantages of laser confocal microscopy in microstructure analysis of TRIP steelSkálová, L.; Staňková, H.; Mašek, B.in: Focus on Microscopy - FOM 2007, Valencia, Spain, April 2007
  8. Influence of aluminium on retained austenite stabilization during thermomechanical treatment of low-alloyed TRIP steelStaňková, H.; Skálová, L.; Meyer, L. W.; Mašek, B.in: Acta Metallurgica Slovaca 13, Vol.1, 2007, s. 208-213, ISSN: 1335-1532
  9. Comparison of TRIP steel microstructures after thermo-mechanical treatment with isothermal and anisothermal deformation stepsSkálová, L.; Staňková, H.; Jandová, D.; Mašek, B.in: Acta Metallurgica Slovaca 13, Vol.1, 2007, s. 208-213, ISSN: 1335-1532
  10. Nové možnosti materiálového modelování pro návrhy a optimalizaci kovárských technologiíMašek, B.; Staňková, H.; Nový, Z.in: 6. Kovárenská konference – Nové technologie kování, s. 5, ISBN 978-80-239-8938-0, 2007
  11. Moderní koncepty mazání pro použití v nárocných kovárských technologiíHartwig, H.; Seidel, H.; Mašek, B.in: 6. Kovárenská konference – Nové technologie kování, s. 17, ISBN 978-80-239-8938-0, 2007
  12. Nástroje pro extrémní deformace kovuNový, Z.; Jíra, T.; Zrník, J.; Kešner, D.; Mašek, B.; Kovárík, T.in: 6. Kovárenská konference – Nové technologie kování, s. 17, ISBN 978-80-239-8938-0, 2007
  13. Application of New Microscopic Methods for Analyses of Multiphase SteelsStaňková, H.; Skálová, L.; Mašek, B.in: 8th Multinational Congress on Microscopy, s. 201, Prague, June 2007, ISBN 978-80-239-9397-4
  14. Possible Application of Laser Scanning Confocal Microscopy in Material ScienceSkálová, L.; Staňková, H.; Mašek, B.in: 8th Multinational Congress on Microscopy, s. 199, Prague, June 2007, ISBN 978-80-239-9397-4
  15. Physical modelling of microstructure development during technological processes with intensive incremental deformationMašek, B.; Staňková, H.; Malina, J.; Skálová, L.; Meyer, L. W.in: Key Engineering Materials Vols. 345-346 (2007) pp. 943-946, 2007, ISBN 0-87849-440-5
  16. Influence of the chemical composition of 20MoCrS4 and low-alloyed TRIP steel on the intensity of high temperature corrosionMašek, B; Staňková, H.; Meyer, L. W.; Krüger, L.in: Materials and Corrosion 2007, 58, No. 9, s. 704 - 709, ISSN 1521-4176, 2007
  17. Influence of the forming conditions on the mechanical properties of the final product, when using the profile rolling processMalina, J.; Mašek, B.; Staňková, H.in: International Conference on Structural Analysis of Advanced Materials - ICSAM 2007, s. 37, Recko, 2-6.9 2007
  18. Microstructure development in aluminium alloy 5754 and 7075 processed by constrained groove pressingKovářík, T.; Mašek, B.; Nový, Z.in: International Conference on Structural Analysis of Advanced Materials - ICSAM 2007, s. 37, Recko, 2-6.9 2007
  19. Modelování a měření deformace v tahokovuNový, Z.; Duchek, M.; Džugan, J.; Mentl, V.; Voldrich, J.; Tikal, B.; Mašek, B.in: FORMING 2007, Podbanské (Slovensko) 12.-15. zárí 2007, ISBN 978-80-227-2702-0
  20. Retained austenite evaluation in high strength steelsNemecek S., Nový Z., Uhlír J., Janovec J.in: The international conference „New developments on metalurgy and aplications of high strength steels”, May 26-28, Buenos Aires, Argentina
  21. Lisování nerozebiratelných spoju rámových konstrukcíNový, Z.; Urbánek, M.in: FORMING 2007, Podbanské (Slovensko) 12.-15. zárí 2007, ISBN 978-80-227-2702-0
  22. Rychlá a levná výroba nástroju pro tváření malých sérií plechových dílu metodou hydroformingŠuchmann, P.; Duchek, M.in: FORMING 2007, Podbanské (Slovensko) 12.-15. zárí 2007, ISBN 978-80-227-2702-0
  23. Kinematika robotaVoborník, P.; Piskac, L.in: XXX. konference Elektricke pohony, Plzen, cerven 2007

2006

  1. Structure refinement in TRIP steel by means of intensive incremental deformation for rotary spin extrusionMašek, B.; Staňková, H.; Meyer, L. W; Nový, Z.; Klíber, J.in: Asia Steel International Conference 2006, Fukuoka, Japan, 2006
  2. Trends in the Development and Research of Forming Technologies at the University of West Bohemia in PilsenNové trendy ve vývoji a výzkumu technologií tváření na Západočeské univerzitě v PlzniMašek, B.; Bernášek, V.; Staňková, H.; Malina, J.; Fryšová, V.in: International Workshop, Ostrava, 2006, ISBN 80-248-1100-6
  3. Influence of thermomechanical treatment of the TRIP steel on the final microstrucureMašek, B.; Staňková, H.; Malina, J.; Meyer, L. W.; Nový, Z.in: 14th International Scientific Conference CO-MA-TECH, Trnava, Slovensko, 2006
  4. Microstructure of C-Mn-Si-Nb TRIP steel after thermo-mechanical processingSkálová, L.; Jandová, D.; Mašek, B.in: 14th International Scientific Conference CO-MA-TECH, Trnava, Slovensko, 2006
  5. Microstructures and mechanical properties of ultrafine grained AlMgSi alloy processed by ECAP and their thermal stabilityKovářík, T.; Zrník, J.; Mašek, B.in: 4th International Phd Conference on Mechanical Engineering, Plzeň, 2006
  6. FEM analysis of the influence of surface roughness on the Stress distribution during rotation-bending testMalina, J.; Behúlová, M.; Staňková, H.; Mašek, B.in: Lifetime of Materials and Constructions, Brno, 2006
  7. Influence of deformation on the final structure with cross rolling processMalina, J.; Vražič, I..; Staňková, H.; Mašek, B.in: 14. International Scientific Conference CO-MA-TECH, Trnava, Slovensko, 2006
  8. Influence of the amount of reduction on deformation character during reduction cross rollingMašek, B.; Malina, J.; Staňková, H.; Meyer, L. W.in: 8th international conference – “Forming Technology, Forming Tools and Machines” - FORM 2006
  9. Distribution of deformation during the reduction cross rolling processMalina, J.; Staňková, H.; Mašek, B.in: 4th International PhD Conference on Mechanical Engineering, Plzeň, 2006
  10. Verification of the Validity of the Common Phenomenological Models for Low-Alloyed TRIP SteelStaňková, H.; Motyčka, P.; Meyer, L. W.; Mašek, B.in: 10th International Research/Expert Conference - “Trends in the Development of Machinery and Associated Technology” - TMT 2006
  11. Microstructure development in TRIP steel after simulated thermomechanical processingSkálová, L.; Jandová, D.; Mašek, B.in: 10th International Research/Expert Conference - “Trends in the Development of Machinery and Associated Technology” - TMT 2006
  12. Testing Jig for Mini Tensile SpecimensHlaváč, J.; Štádler, C.; Duník, M.in: 4th International PhD Conference on Mechanical Engineering, Plzeň, ISBN 80-7043-486-4, 2006
  13. Forging Tool for Constrained Groove PressingHlaváč, J.; Štádler, C.; Mašek, B.; Fišer, P.in: International conference on Computer Aided Design and Manufacturing CADAM'06, Supetar, Croatia, ISBN 953-7142-19-0, 2006
  14. Možnosti generování fázové modulace pro řízení měničů typu FULL BRIDGERonešová, A.; Krupka, F.; Mašek, B.in: Sborník príspevku konference VRŠOV 2006, ISBN 80-214-3247-0, 2006
  15. Werkstoffeigenschaften bei der Herstellung und Verarbeitung von StahlrohrenDiekmann, U.; Meyer L.W., Mašek B.in: 9. Werkstofftechnisches Kolloquium, Chemnitz, Germany, ISBN-10 3-00-019101-1, 2006
  16. Static and Dynamic Induction Heating – Experiment and Numerical SimmulationBehúlová, M.; Mašek, B.; Meyer, L. W.in: Materialprüfung – Werkstoffe und Bauteile, Technologien und Anwendung, 48. Jahrgang, 5/2006, p. 217-224, ISSN 0025-5300
  17. Fázová modulace jako alternativa k PWM pro řízení měničů typu full bridgeRonešová, A.; Mašek, B.in: Elektrotechnika a informatika 2006, Nečtiny, ISBN 80-7043-473-2
  18. Návrh parametrov dynamického indukčného ohrevu tyčového polotovaru v závislosti od rýchlosti posuvu induktoraBehúlová, M.; Mašek, B.; Meyer, L.W.in: Fluid Mechanics and Thermomechanics : Zborník abstraktov / nadát. Medzinárodná vedecká konferencia katedier mechaniky tekutín a termomechaniky. XXV. Modra-Harmónia, 28.-30.6.2006. – Bratislava, STU v Bratislave, 2006. - ISBN 80-227-2434-3
  19. Design of cooling parameters of a rod semi-product for the forming process supported by numerical simulationBehúlová, M.; Mašek, B.; Meyer, L. W.in: KOD 2006 : Zbornik radova / nadát. Simpozijum sa medunarodnim učešcem. 4. Konstruisanje, oblikovanje i dizajn. Palic, 30-31. maj 2006. - Novi Sad (Srbsko a Čierna Hora) : Fakultet tehničkih nauka, 2006, pp. 281-286. ISBN 86-85211-92-1
  20. Analysis of temperature distribution in samples by direct electrical heatingBehúlová, M.; Staňková H.; Mašek B.in: Materials Science and Technology (online) - ISSN 1335-9053, 2006, (in print)
  21. Behaviour of Low-Alloyed TRIP Steels during High-Temperature CorrosionMašek B.; Staňková H.; Meyer L.W.; Krüger. L.in: 24th Annual Conference Corrosion Problems in Industry, Hurghada, 4.-6. 12. 2006, Egypt
  22. Aspects of thermomechanical processing controlling the austenite transformation in Si-Mn TRIP steelZrnik, J.; Stejskal, O.; Novy, Z.; Hornak, P.in: TMS 2006, JOM, February 2006
  23. Relatonship of microstructure and mechanical properties of TRIP aided steel processed by press forgingZrnik, J.; Stejskal, O.; Novy, Z.; Hornak, P.; Fujda, M.in: The Seventh Asia Pacific Conference on Materials Processing, 2006, Singapore, December 4-6, 2006
  24. Aspects of thermomechanical processing controlling the austenite transformation in Si-Mn TRIP steelZrnik, J.; Stejskal, O.; Novy, Z.; Hornak, P.in: Materials Science & Enginnering, (accepted 2006)
  25. Microstructure in TRIP steels after intercritical heat treatmentNemecek, S.; Nový Z.in: ICASS 2006, Gyeongju, Korea, pp. 922-927, August 2006
  26. Comparison of the Intensity of High Temperature Surface Damage for 20MoCrS4 Steel with Varying Parameters of Dynamical HeatingMašek B.; Staňková H.; Krüger, L.; Meyer L.W.in: Material Science and Technology, Vol. 22, No. 12, 2006, ISSN: 0267-0836

Patička

Copyright © 1991 - 2018 UWB Plzeň

Univerzitní 8, Pilsen, Czech Republic